How To Properly Chlorinate A Pool?

Properly chlorinating your pool is an essential part of pool maintenance. Not only does it help keep your water clean, but it also helps keep swimmers safe from bacteria and germs.

To ensure that your pool is properly sanitized, it’s important to understand why chlorination is important, how often you should be chlorinating your pool, and step-by-step instructions on how to do it properly. Here’s an overview of what you need to know about chlorinating your pool the right way.

How Often Should You Chlorinate Your Pool?

The frequency with which you should chlorinate your pool depends on several factors. These include the pool size, whether or not you have children using the pool, the water temperature, and how often the water is used. Generally speaking, chlorine levels should be tested weekly and adjusted as necessary. Furthermore, if your pool has been exposed to heavy rain or increased usage, such as during a party, it is best to test chlorine levels more frequently.

8 Steps to Properly Chlorinate the Pool

Chlorinating a pool can seem like a daunting task if you’ve never done it before. But don’t worry—it’s quite simple! Here are step-by-step instructions on how to properly chlorinate a pool:

1. Test the Water: Before adding any chemicals, it is essential to test the water’s pH and chlorine levels using a testing kit. The ideal pH range is between 7.2 and 7.6, and the recommended chlorine level is between 3 and 5 ppm.
2. Choose a Chlorine Source: Chlorine is available in different forms, such as liquid, granular, or tablet. Choose the form that is best suited for your pool and the equipment you have.
3. Determine the Amount of Chlorine Needed: The amount of chlorine you need will depend on the size of your pool and the current chlorine level. Refer to the instructions on the chlorine package for the correct amount needed.
4. Add Chlorine to the Pool: Follow the instructions on the chlorine package to add the right amount of chlorine to the pool. It is recommended to add the chlorine to a bucket of water first and then pour it into the pool to avoid bleaching the pool’s surface.
5. Allow the Chlorine to Disperse: Let the chlorine disperse throughout the pool by running the pump and filter system for at least 4-6 hours.
6. Retest the Water: After the chlorine has had time to disperse, retest the water using a testing kit to ensure that the pH and chlorine levels are within the recommended range.
7. Maintain Chlorine Levels: To keep your pool properly chlorinated, test the water regularly and add more chlorine as needed. You may also need to shock the pool occasionally to kill off any algae or bacteria that may have developed.
8. Be Safe: Always wear gloves and eye protection when handling chlorine. Also, make sure to store it in a cool, dry place away from children and pets.

Remember, chlorinating your swimming pool can seem intimidating at first, but it doesn’t need to be! With some basic knowledge about what products work best for each situation and key tips and tricks from professionals like Executive Blue Pools, you’ll have no problem keeping your backyard oasis clean and safe this summer season.

Here are some other ways that you can try to ensure that your pool stays clean, clear, and safe for swimming all season long.

Install an inline chlorinator

An inline chlorinator is typically attached directly to the pump system in your pool. This device automatically adds chlorine into the water as it circulates through the pump system and back into the pool. This is the easiest way to ensure that your pool stays properly chlorinated at all times!

Install a salt cell system

A salt cell system uses electrolysis to turn ordinary table salt into chlorine gas which then gets added to the water as needed for proper sanitation and cleaning purposes. This type of system is more expensive than an inline chlorinator, but it can save you money in the long run due to its reduced need for manual addition of chemical treatments such as chlorine tablets or granules.

Use a floater in the pool

You can also use floaters in your pool that contain premeasured amounts of chlorine tablets or granules inside them. These floaters release small doses of chlorine into the water throughout each day and help maintain proper sanitization levels while keeping swimmers safe from bacteria and germs that could otherwise make them sick if present in large enough quantities in untreated water.

How Do I Get My Pool Water To A Proper Chlorine Level?

To ensure proper levels of chlorine in your swimming pools, you must do regular testing using specialized kits designed specifically for this purpose; these kits will help determine if there are enough or too few dissolved solids present for optimal sanitization results.

For assistance getting started with proper chlorination for your swimming pool, contact Executive Blue Pools today – we specialize in providing high-quality pool services in Frisco, TX. And if you ever have any questions about proper maintenance techniques, please don’t hesitate to reach out for help so that everyone can enjoy their time by making memories without worrying about potential health risks associated with improper sanitation practices! Happy Swimming!